Pinhead 3d printable bust

A 3d printable bust of Pinhead from the Hellraiser movies.

I made this in Fusion 360, and it's made from multiple bodies, which can be printed in their correct (or close to) colours, and then assembled afterwards.

The only parts that need colouring afterwards, will be the eyes and the lines on his head. If you have a 3d printer with an MMU, you might be able to print it all coloured, but for a single colour printer, either colour in the eyes and lines with a permanent marker or paint. 

The clearances for the gaps around parts that fit together is set at 0.2mm, which is a fairly reliable size for Prusa printers. The parts should fit together easily enough by hand, but be tight enough to remain in position.

I'd recommend doing a test fit on the base and a letter at first. If the letter wont slot in to the base, you may need to tweak your printer settings, or if you purchased the Fusion360 file, you can adjust all the clearances at once by changing a parameter value I set up. (Feel free to ask for help if you're not sure)