Medallion, depicting the deity baphomet, that the Knights Templar were accused of worshipping, file STL, OBJ for 3D printers, two sizes

follow me

FACEBOOK:   https://www.facebook.com/groups/1797954133626126/?ref=bookmarks            

ISTAGRAM:   cody3d1 https://www.instagram.com/cody3d1/                        

TWITTER:       https://twitter.com/Cody3D

YOUTUBE:     https://www.youtube.com/channel/UCegptSyuzQWuU1Fow04_MKw?view_as=subscriber

Medallion, depicting the deity baphomet, that the Knights Templar were accused of worshipping, file STL, OBJ for 3D printers, two sizes

two size                  

however, the dimensions can be changed with each slicer

composed of 1041 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

composed of three pieces

dimensions approximately  FDM-FFF     Z 23,5 Cm  X 19,4 Cm   Y 3,3 Cm

                                                                    Z 92 Inch  X 76 inch  Y 12 inch

composed in one piece

dimensions approximately  DLP-SLA-SLS    Z 6 Cm  X 5 Cm   Y 1Cm

                                                                         Z 2,3 inch   X 1,9 inch   Y 0,4 inch

all files are already in place for optimal printing

This 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

Baphomet is term that was originally associated with an idol that the Knights Templar were said to have worshipped. Later, Baphomet was incorporated into other  tradoccultitions as a powerful figure, often depicted as a winged man with the head of a goat.

Baphomet has reportedly been in use since at least the 1090s, when it appeared in an early Crusader’s letter. The name itself, although certainly not its modern image, may have been connected with Islam, as chroniclers referred to mosques as Bafumarias. Some think Baphomet is a corruption of Mahomet, an alternate spelling of Muhammad, although many other cryptic origin theories have been provided.

Regardless of its specific origins, Baphomet got much more attention after the Knights Templar, a medieval Catholic military order, were interrogated under the Inquisition. Under torture, some admitted to worshipping a pagan idol named Baphomet. This figure didn’t have a consistent appearance or nature, and not all Templars admitted to worshipping it. It’s unclear whether Baphomet actually had anything to do with the Templars’ activities, whether it was an accusation the Church created to lend more weight to their other charges of heresy, or whether the admissions were simply tortured out of them.

Baphomet fell into relative obscurity for some time, but was reborn in 19th-century occult works, thanks especially to Eliphas Lévi. In the mid-1850s, Lévi published a picture of Baphomet in his book Dogmas and Rituals of High Magic. The illustration greatly inspired Baphomet’s current incarnation; it was a human-goat amalgamation referred to as the “Sabbatic Goat.” This depiction would go on to influence the iconic Rider-Waite tarot card image of the Devil. In some occult, mystical, or religious traditions, Baphomet is a deity that represents the sum of the entire universe and all its opposing forces.

Due to its association with Satanism, Baphomet can be viewed as a demonic or subversive symbol, and thus stand in for something considered evil or deviant. It can also serve as an identifying marker for those aligned with the occult. However, many occultists view Baphomet not as demonic but as an idol or deity that harmonizes cosmic opposites, e.g., good and evil, man and woman. Additionally, people have gotten into the habit of juxtaposing Baphomet’s historically taboo image against contemporary pop culture for humorous effect.

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

it is recommended to print with a 4-5 skirt

Quality

Layer height: 0.1mm*

Initial layer thickness: 0.3mm

Bottom/top pattern: lines

Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

Infill speed: 30mm/s

Outer shell speed : 30mm/s

Inner shell speed: 20mm/s

Top/bottom speed: 20mm/s

Support speed: 50mm/s

Travel speed: 150mm/s

Skirt speed: 30mm/s

Amount of slower layers: 4

Infill:

Infill pattern: Grid

Line distance: 1.5mm

Infill overlap: 20%

Infill layers: 0

Support:

Enable support: Check

Placement: Everywhere

Overhang angle: 30°

X/Y distance: 0.7mm

Top distance: 0.2mm

Bottom distance: 0.2mm

Stair step height: 0.5mm

Join distance: 0.7mm

Area smoothing: 0.6mm

Use towers: check

Pattern: Grid

Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.

Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation

of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this

page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.

Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing

on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence