Pipes Pack - Updated and Expanded Release

This is the updated and expanded version of both the original "Pipes pack," and the "Pipes Pack Expansion" found at the following links.

https://www.artstation.com/vin-c/store/JgBn/pipes-pack

https://www.artstation.com/vin-c/store/3Wxb/pipes-pack-expansion

(Please note, if you purchased either of the two packs previously, do not buy this product as you'll be charged for the same parts again. This pack is intended for those who haven't purchased either before.

This pack includes 30 separate models in OBJ and Blender file formats, compiled into 1 zip file. (1024 resolution thumbnail images are included for each model, for easy referencing of parts.) Additionally the low poly bolt used on final parts has been included as a separate model.

Each model has its own UV map generated. (No textures included.)

Geometry is low poly quads. (Please note, renders were created with a subdivision surface modifier applied.)

This pack includes:

3 straight pipes at short, medium, and long length.

2 curved parts, a 90 and a 45 degree bend.

2 angled parts, a 90 and a 45 degree bend.

5 T-Connectors, including two straight variations, one 45 angle, and two curved, (One 45 degree angle and one 90 degree.)

5 end cap variants, 1 with a flat cap, 1 with an added valve,  one hinged valve cap, and 2 vents

3 Valve Connectors including 1 with 3 interchangeable cap variants. (1 standard top and 2 valves.)

1 four point cross-section connector.

1 six point cross section connector.

5 miscellaneous connectors, including two shorter length rings, and two standard length.

Additionally there is also a variation of the hinged end cap model (in Blender format), with relationships set up. (If using the OBJ version, you will have to separate and re-parent/re-rig the part.)

Please Note: Images of assembled pieces includes some parts from the original pipes pack.

Added commercial use variant.